Excellent tooling technology through long years of experience
The nak-vibration feeders operate with compensation of vibration forces, that means the vibration forces are balanced inside the appliance.
The compensation of vibration forces results from the principle of counter vibration..
Properties and advantages of the compensation of vibratory forces:
- - vibration forces are balanced in the basic appliance
- - reduction of transmission of vibratory forces
- - defined and fixed interfaces toward assembly facility through compensation of torque in the linear feeder
- - flexible adjustment to specific feeding problems by variation of feeding-specific parameters like spring angle and rigidity of spring
- - omission of heavy countermasses results in lower weight of basic appliances and saving of energy
- - consequent modular-design principle in segmental construction
KWF-series
| typ |
a (mm) |
b (mm) |
c (mm) |
d (mm) |
e (degree) |
f (mm) |
g (mm) |
h (mm) |
k (mm) |
m (mm) |
n (degree) |
p (degree) |
| KWF 300 |
260 |
260 |
107.5 |
154.6 |
120 |
230 |
6x phi-5 |
160 |
3xM8 |
M12 |
120 |
0 |
| KWF 400 |
305 |
340 |
112.5 |
229.5 |
90 |
280 |
6x phi-5 |
220 |
4xM8 |
M12 |
120 |
5 |
| KWF 500 |
380 |
460 |
133.5 |
267.0 |
90 |
340 |
6x phi-5 |
295 |
4xM8 |
M16 |
120 |
35 |
| typ |
KWF 300/400/500 |
| Direction of rotation |
optional right of left |
| Power suply (V/Hz) |
230/50 oder 115/60 |
| Standard color of drive |
RAL 3002 (special varnish by request) |
| Protection |
IP31 |
| Control |
optional RG 1, RG 2, RG 3 (not in scope of supply) |
KWF-series
| typ |
a (mm) |
b (mm) |
c (mm) |
d (mm) |
e (degree) |
f (mm) |
g (mm) |
h (mm) |
k (mm) |
m (mm) |
n (degree) |
p (degree) |
| KWF 200 |
180 |
164 |
120 |
120 |
3x120 |
-- |
3x phi-4 |
100 |
3xM6 |
M10 |
3x120 |
15 |
| KWF 250 |
210 |
210 |
126 |
121 |
3x120 |
190 |
3x phi-4 |
190 |
3xM6 |
M12 |
3x120 |
60 |
| typ |
KWF 200/250 |
| Direction of rotation |
optional right of left |
| Power suply (V/Hz) |
230/50 oder 115/60 |
| Standard color of drive |
RAL 3002 (special varnish by request) |
| Protection |
IP31 |
| Control |
optional RG 1, RG 2, RG 3 (not in scope of supply) |
AWF-series
| typ |
AWF 150 |
AWF 200 |
AWF 250 |
AWF 300 |
AWF 400 |
| c (mm) |
105 |
155 |
210 |
260 |
310 |
| d (mm) |
70 |
100 |
152 |
200 |
200 |
| e (mm) |
75 |
60 |
70 |
75 |
80 |
| f (mm) |
M6 |
M6 |
M8 |
M8 |
M8 |
| g (mm) |
M10 |
M10 |
M10 |
M10 |
M10 |
| typ |
AWF 150/200/250/300/400 |
| Direction of rotation |
optional right of left |
| Power suply (V/Hz) |
230/50 oder 115/60 |
| Standard color of drive |
RAL 3002 (special varnish by request) |
| Protection |
IP31 |
| Control |
optional RG 1, RG 2, RG 3 (not in scope of supply) |
Our helix feeders are two-masses vibration systems and operate according to the micro-throw-principle.
